fernbedienung_02
LED-Controls (VarioControl)

The LED Controls VarioControl are available in the versions BI (Build-in), IP 20 and IP67. All control units work at 8 to 24V input voltage and provide a 2Amps output current for each channel. The controls are build for manual control, IR-control, 1-10V or DMX control.

!

Vario Control Remote IR

Infrared Remote Control for modules VarioControl 3 Channel Slim, Vario Control 3 Channel and VarioControl 8 Channel

Vario Control 3 Channel Slim

  • Circuit for direct control of LED modules, 1 input to the power supply, 3 power outputs, 1 input for an IR receiver, 1 output signal for control LED
  • The circuit (Vario Control 3 Channel) for direct operation of LED modules.
  • Supply voltages in the range from 8 to 24 Vdc.
  • Brightness adjusting of LED modules with PWM control  (3 outputs; K1 to K3; 2A max.)
  • Operation of the circuit: IR remote control (Vario Control Remote IR) and connected IR receiver.
  • A function display can be connected

    • Vario Control 3 Channel BI

  • Circuit for direct control of LED modules, 1 input to the power supply, 3 power outputs, 1 input for an IR receiver, 1 output signal for control LED
  • The circuit (Vario Control 3 Channel) for direct operation of LED modules.
  • Supply voltages in the range from 8 to 24 Vdc.
  • Brightness adjusting of LED modules with PWM control  (3 outputs; K1 to K3; 2A max.)
  • Operation of the circuit: IR remote control (Vario Control Remote IR) and connected IR receiver.
  • A function display can be connected

    • Vario Control 8 Channel BI

  • Circuit for direct control of LED modules, 2 inputs for power, 8 power outputs, 1 input for an IR receiver, 1 output signal LED (red / green)
  • Circuit (Vario Control 8 Channel BI) for direct operation of LED modules
  • Supply voltages in the range from 8 to 24 Vdc.
  • Brightness adjusting of LED modules with PWM control (8 outputs, 2A max.)
  • Operation of the circuit: IR remote control (Vario Control Remote IR) and connected IR receiver.
  • A function display can be connected

    • Vario Control 1-10 / Poti BI

  • Circuit for direct control of LED modules, 2 inputs for power, 8 power outputs, 1 controller 8 to 24 Vdc. The settings are made with the 3 preconfigured buttons. All data and settings remain without power supply.
  • Direct operation of LED modules.
  • Supply voltages from 8 to 24 Vdc.
  • Two separate inputs for supply voltages (UinA and UinB), simultaneous operation of LED modules with different voltage (or total allocation of the two power supplies).
  • Voltage: Connect UinA+ with UinB + and UinAUinB.
  • The adjustment of the brightness of the LED modules is controlled by PWM outputs. 8 outputs (Led1 to Led8), each up to 2A.
  • Operation on controller button (speed function). 

    • Vario Control DMX - Receiver BI

  • Circuit for direct control of LED modules, 1 input for power-supply,
  • Application: DMX receiver designed for the direct operation of LED modules.
  • Supply voltages in the range from 8 to 24 Vdc.
  • Brightness adjustment of the LED modules made by the PWM outputs. 4 outputs (K1 to K4), each up to 2A
  • Programming of DMX address via programming input (see description below)

    • Vario Control Booster BI

  • Circuit for performance enhancement (booster) and decoupling 1 input for power,
  • 4 power outputs, 4 PWM inputs
  • Direct operation of LED modules
  • Supply voltages in the range from 8 to 24 Vdc.
  • Brightness adjusting of the LED modules by usage of pwm outputs, correspond to the respective input signal
  • There are 4 outputs available (Out1 to Out4), each up to 2A.
  • The inputs receive their signals (PWM) from an external controller.
  • Only for operation with PWM circuits, which provides a common positive pole for the LED Modules.

    • Vario Control Teach - DMX programming unit

    • Circuit for direct control of LED modules, 1 input for power-supply,
    • Application: DMX receiver designed for the direct operation of LED modules.
    • Supply voltages in the range from 8 to 24 Vdc.
    • Brightness adjustment of the LED modules made by the PWM outputs. 4 outputs (K1 to K4), each up to 2A
    • Programming of DMX address via programming input (see description below)